- Important information
- New features
- Known problems
- Program corrections
- User guide corrections
- Miscellaneous
- Release history
Important information
-
In case you are using 1 pin Emulation POD USB with ISO you can speed up the communication by doing the following: Select Device Manager and expand the Ports(COM & LPT) setting. Open properties for 1-pin Emulation POD USB with ISO and select the Port Settings property page. Click the Advanced... button and set Latency Timer to 1 msec.
New features
- None
Known Problems
-
The following devices are not supported:
- ADUC812
- ADUC814
- ADUC816
- ADUC824
Program Corrections
- None
User guide corrections
- None
Miscellaneous
- Nothing
Release history
8.20.1, Oct 2012
New features
- None
Program corrections
- None
8.11.1, Feb 2012
New features
- None
Program corrections
- None
8.10.4, Dec 2011
New features
- None
Program corrections
- None
8.10.3, Sep 2011
New features
- None
Program corrections
- None
8.10.1, May 2011
New features
-
The cache used by the Memory window will now update itself at runtime to also reflect changes to code memory.
-
When the device is programmed, the contents of the data flash area is now retained by default. A new option, Erase data flash, has also been added. When selected, this option will clear the contents of the data flash area when the device is programmed.
Program corrections
-
None.
V7.51A, March 2009
No changes.
V7.50A, June 2008
-
The stack plugin is now able to initialize the extended stack correctly.
V7.40A, February 2008
-
Sometimes breakpoints were not removed at the end of a debug session due to a problem with the CODE memory cache of the driver. This has been corrected.
V7.30B, September 2007
No changes.
V7.21A, March 2007
-
When single stepping through C code, sometimes stepping over a return statement could cause the debugger to loose track of its current position.
V7.20H, Nov 2006
-
The driver now supports both ADu and ADe devices.
-
The driver has been updated to improve stability and download speed.
V7.20D, May 2006
-
There is a new option named 'CPU core clock frequency'. Here are the frequencies for some of the boards:
- ADUC831 11059200 (if the 11.0592MHz crystal is used)
- ADUC832 16777216
- ADUC834 12582912
- ADUC836 12582912
- ADUC841 11059200 (if the 11.0592MHz crystal is used)
- ADUC842 16777216
- ADUC843 16777216
- ADUC845 12582912
- ADUC846 12582912
- ADUC847 12582912
- ADUC848 12582912
-
The communication between the host and the device has been improved. This improvement will make all the debug commands execute faster.
V7.20B, Nov 2005
-
It is now possible to select among more than just 4 different COM ports.
V7.20A, Oct 2005
No changes.
V7.10A, July 2005
Initial release.