IAR Information Center for STM8

• Important information
• New features
• Known problems
• Program corrections
• User guide corrections
• Miscellaneous
• Release history

Important information

• None.

New features

• None.

Known Problems

• None.

Program Corrections

• None.

User guide corrections

• None.

Miscellaneous

• Nothing.

Release history

V2.20.1 - 2015-11-26

• None.

V2.10.5 - 2015-07-09

• None.

V1.42.3 - 2014-09-10

• [EW24406] The simulator cannot handle non-positive relative jumps for the instructions BTJF ("Bit Test and Jump if False") and BTJT ("Bit Test and Jump if True").

V1.40.1 - 2013-03-05

New features

• Data Log
  The Data Log functionality is now available in the simulators. This includes:
  - Data Log breakpoints
  - Data Log will be available from the simulator menu
  - Data Log Summary will be available from the simulator menu
  Note: A limit of four simultaneously active data log breakpoints exists. There is a macro called __setDataLogBreak available. It takes two parameters, location and access, which have the same definition as for the __setDataBreak macro.

Program corrections

• [EW22939] The TC and RXNE were switched in UART3 status registers for the STM8S20x devices. This is now corrected.

• [EW23195] Corrected bits in the Timer 3 registers for the STM8L10x devices.

• [EW23416] Corrected bits in the ADC1_CR2 register for the STM8L151x8 devices.

V1.30.2 - 2011-12-21

Program corrections

• Missing bits in the RTC registers added for the STM8151x, STM8L152x, and STM8L162x devices.

V1.30.1 - 2011-04-05

• None.

V1.20.1 - 2010-11-03

• None.

V1.10.4 - 2010-07-13

Program corrections

• Interrupt simulation priority problems are corrected.

V1.10.3 - 2010-07-13

Program corrections

• In the C-SPY simulator, a breakpoint set inside an interrupt routine was never reached. This has been corrected.

V1.10.0 - 2010-04-16

• First official release